Plug and Play: New Solar Considerations in Light of Adoption of Senate Bill 868

Share this article:

On September 30, 2026, Senate Bill 868 (“SB 868”), also known as the “Plug and Play Solar Act,” was signed by the governor. SB 868 takes effect on January 1, 2027. Through January 1, 2030, qualifying portable solar devices are exempt from state, California Public Utilities Commission, and local utility interconnection requirements. While SB 868 strips away utility-side red tape and interconnection barriers to offer a flexible and accessible way for individuals to generate their own clean energy, it does not directly mention community associations. Accordingly, SB 868 does not automatically strip away all association aesthetic rules. Given the convenience of plug-in solar, the systems are destined to become more prevalent. Association boards need to consider whether regulations are appropriate in anticipation of demand.

 

Summary of SB 868 and Plug-In Solar Systems

SB 868 defines “portable solar generation devices” as panels with a small inverter of up to 1,200 W AC output that connect through a standard 120 V outlet. These plug in systems must meet the U.S. safety certification standard of UL 3700. It is important to note that some plug-in solar systems exist that to not meet the UL 3700 standards, which presents safety concerns and could trigger circuit overloads. SB 868 only applies to systems meeting the UL 3700 standard.

Physically, the plug-in solar systems are about 2 to 3 long (approximately 3 to 4 panels) and are small enough to fit on a balcony or patio. SB 868-compliant systems cost approximately $1,500-$2,500. The electricity generated flows backward through the branch circuit to power active appliances within the unit and, by supplying power locally, the system reduces the amount of electricity a unit pulls from the utility grid. The system only offsets power a resident consumes the moment it is generated; there is no net-metering export credits for excess power sent back to the grid.

 

Can an association prohibit plug-in solar?

No. Civil Code section 714 provides that any covenant or rule that effectively prohibits or restricts the installation or use of a “solar energy system” is void and unenforceable. This is not limited to standard roof solar energy systems as the term “solar energy system” is defined in Civil Code section 801.5 to include “any solar collector or other solar energy device whose primary purpose is to provide for the collection, storage, and distribution of solar energy for space heating, space cooling, electric generation, or water heating.” Plug-in solar systems fall into this definition.

Civil Code section 714 permits reasonable regulations of solar energy systems. A rule is deemed unreasonable if it significantly increases the cost (over $1,000) or decreases efficiency (reduces output by 10% or more).

 

Association Concerns

Association boards may want to consider adopting regulations that govern aesthetics and safety compliance.

  1. Aesthetics – Given the size of the plug-in solar panels and the ease of use, some owners may treat them more akin to an appliance, failing to consider that they are making an exterior modification to their dwelling requiring association input and approval. Adopting clear regulations governing location and attachments are recommended, assuming the association has the ability to pick a location that does not unreasonably limit efficiency. If there are multiple balconies or patios for an owner to choose from, does the association want to state a preference in the guidelines? Given most plug-in solar panels are newer to the market, the association may be limited in what colors and specifications it can require.
  2. Common Area Damage – Most plug-in solar panel kits come with mounting kits. Owners may want to install the panels on railings or mount onto building exteriors, both of which an association may maintain in a condominium project. Boards should consider adopting rules which require owners to enter into license, maintenance, and indemnity agreements (“LMI”), which explicitly require owners take responsibility for resulting damage. Said LMI agreement should be recorded with the county so that all future owners are on notice of the duty to maintain the panels and indemnify the association, assuming the panels remain on property when the dwelling or unit is sold. Such an agreement or regulations should also address removal for when common area maintenance is required; for example, how much notice must an association provide and can an association remove said panel if an owner fails to comply?
  3. Safety – Regulations should clearly state that the UL 3700 certification standard is required for any plug-in solar. Anything less than standard creates an electrical safety issue. Additionally, panels mounted on railings, if permitted, present a safety issue for those walking below. Again, this is why installation potentially involving common area or presenting a safety issue should require owners indemnify the association in an LMI agreement.

If an association already has solar energy system guidelines, we suggest updating them to address plug-in solar systems as they may have a simpler approval process given a common area or shared roof would not be involved, but certain aesthetic concerns would need to be met.

We strongly suggest associations consider reaching out to legal counsel to address concerns with plug-in solar systems in anticipation of receiving the architectural applications or, better yet, to inform owners who may be interested in installing that they need to apply first!